Skip to content

Independent gift guides · researched by real people · updated every season

Woodworking

How to make wooden photo blocks

A favorite photo on a solid block of wood makes a keepsake that stands on its own. Here is how to prep, glue and seal photo blocks, plus design and wrapping ideas.

Quick answer

Wooden photo blocks are chunky wood blocks with a printed photo glued to the front using a decoupage medium such as Mod Podge, then sealed. Sand the block, paint the edges, print your photo on a laser printer (or seal an inkjet print first so it does not smear), glue it down, smooth out bubbles, and add sealing coats once it is dry. One block takes about an hour of work spread over an afternoon of drying.

  • Time About 1 hour hands-on, plus 3 – 4 hours of drying (longer if sealing an inkjet print first)
  • Difficulty Easy
  • Cost About $15 – $30 for a set of 3 – 4 blocks
  • Makes A set of freestanding photo blocks for a shelf or desk

Photo blocks sit somewhere between a frame and a keepsake. They stand on their own, look good in a row, and give a favorite photo some weight. They are a natural gift for grandparents, new parents, a partner or a best friend, and you can make a matching set in one sitting.

Choosing wood and photos

The blocks

Craft stores sell pre-cut, sanded wood blocks in several sizes. You can also cut your own from scrap lumber: a length of 2x4 or 2x6 cut into pieces gives a solid, rustic block. Cutting with a saw should be done by an adult with eye protection; if you do not have the tools, a hardware store can often make simple cuts for you.

The photos

Choose photos with a clear subject that still reads at small sizes. Crop each one to the exact face of the block. Printing matters with decoupage:

  • Laser prints or copy-shop prints can be used straight away.
  • Inkjet prints can smear when wet glue goes on. The Mod Podge Rocks tutorial suggests letting the ink dry, spraying both sides with clear acrylic sealer, and letting the paper dry for 24 hours before using it.
  • Glossy photo paper is thick and can resist lying flat on a block. Plain or matte paper is easier.

What you need

  • Wood blocks (pre-cut craft blocks or offcuts of 2x4 or 2x6 lumber)
  • Sandpaper (medium and fine grit) and a dust mask
  • Acrylic craft paint and a small brush for the edges
  • Photos printed to size
  • Decoupage medium such as Mod Podge, and a soft flat brush
  • Craft knife, metal ruler and cutting mat, or a paper trimmer
  • A brayer, old gift card or smooth spatula for pressing out bubbles
  • Clear acrylic sealer spray or brush-on water-based clear coat (optional)
  • Felt pads for the bottoms (optional)

How to make wooden photo blocks

  1. Sand the blocks

    Sand any rough faces and edges until smooth, then wipe off all dust with a dry cloth. Sand outdoors or wear a dust mask; OSHA notes that breathing wood dust can irritate the mucous membranes and airways.

  2. Paint the edges and back

    Paint the sides and back, or just the edges that will show around the photo. White, black or a soft color all look good. Let the paint dry completely.

  3. Trim the photos

    Cut each photo to the size of the front face, or a hair smaller so no paper overhangs. A craft knife and metal ruler give the cleanest edges.

  4. Glue the photo down

    Brush a medium, even layer of decoupage medium onto the face of the block. Lay the photo on top, starting at one edge, and press it down.

  5. Smooth out bubbles

    Working from the center outward, smooth the photo with a brayer or old card to push out air and excess glue. Wipe away any glue that squeezes out at the edges. Let it dry for about 15 to 20 minutes, as the tutorial suggests.

  6. Seal the top

    Brush a medium coat of decoupage medium over the photo and the block's edges. Let it dry, then add a second coat. Brush strokes stay visible, so brush in one direction for a neat finish.

  7. Add a clear coat (optional)

    For a tougher, less tacky surface, finish with two or three thin coats of clear acrylic sealer, letting each dry as the product label directs. Spray finishes should be used outdoors or in a well-ventilated area.

  8. Let it cure

    Let the blocks dry fully before wrapping, ideally overnight. Decoupage finishes can stay slightly soft for a while, so avoid stacking blocks face to face.

Tip: Wrinkles usually come from too little glue under the paper or paper that is too thin. A medium layer and patient smoothing fix most problems. Test on a scrap block first.

Design ideas

  • A letter set: Spell a name, "LOVE" or "HOME" with one letter painted on the back of each block and a photo on the front.
  • A year in photos: Four blocks for four seasons or twelve small blocks for each month.
  • Two-sided blocks: Put a photo on both sides so the display can change.
  • Date blocks: Add a wedding date, a birthday or a "first home" date on the edge with a paint pen.

Safety notes

  • Cutting: Adults should do any sawing, with eye protection and the wood clamped down. Children can paint, glue and smooth photos with supervision.
  • Dust: Sand outdoors or wear a dust mask, and clean up dust with a damp cloth rather than blowing it around.
  • Sharp blades: Use a fresh craft-knife blade and a metal ruler, and cut away from your fingers.
  • Sprays: Use spray sealers outdoors or with good ventilation, following the label.

Wrapping photo blocks as a gift

Stack the blocks in a small box lined with tissue so they do not rub together, or line them up on a narrow wooden tray and wrap the whole tray. A note on the back of each block with the date and place the photo was taken turns them into keepsakes. Photo blocks fit right in with other photo gifts and our ideas for personalized photo gifts. For more wood projects, see the wood category, or try a shadow box for a larger keepsake.

Frequently asked questions

Can I use regular photos from a photo lab?

Yes, but thick glossy prints can be harder to keep flat and may curl at the edges. Matte prints or photos printed on regular paper usually work better with decoupage.

Why did my photo smear?

Inkjet ink can run when wet glue is brushed over it. Use laser prints, or seal inkjet prints with clear acrylic spray on both sides and let them dry before gluing.

Are photo blocks waterproof?

No. Standard decoupage medium is not waterproof, even with a clear coat. Keep blocks away from sinks and steamy bathrooms and dust them with a dry cloth.

Can kids make photo blocks?

Yes, with an adult handling the saw and craft knife. Gluing and smoothing photos is a good job for school-age children.

Sources

  1. Mod Podge Rocks — Decoupage on Wood Using Any Printouts. modpodgerocksblog.com
  2. Occupational Safety and Health Administration — Wood Dust. osha.gov
Written by

Gift specialist and lead author at GiftLoving. Jimmy has worked in the gift business for more than 13 years, makes handmade gifts himself, and writes about what makes a present feel thoughtful to the person who receives it.