Skip to content

Independent gift guides · researched by real people · updated every season

Printables

How to make your own gift tags (printable or handmade)

Design, print and cut your own gift tags with free tools, or make them by hand, using sizes and paper weights that work on any home printer.

How to make your own gift tags (printable or handmade)

Quick answer

Design a tag about 2 × 3½ inches (business-card size) in a free tool such as Canva, Google Slides or Avery Design & Print Online, lay out ten per letter-size sheet, and print on 65 – 80 lb cover cardstock at 100% scale. Cut them out, punch a hole about ½ inch from the top, and thread with twine or ribbon. No printer? The same sizes work for hand-cut, hand-lettered or stamped tags.

  • Time 45 – 60 minutes for a sheet of ten, including design
  • Difficulty Easy
  • Cost About $10 – $20 for cardstock and twine that make dozens of tags
  • Makes 10 tags per letter-size sheet at 2 × 3½ inches

Choosing a size and paper

There's no single standard gift tag size, but a few dimensions are easy to work with because they divide neatly into a letter-size (8½ × 11 inch) or A4 sheet.

Tag sizePer letter sheetGood for
2 × 3½ in (business card)10 (2 across, 5 down)Most gifts, bottles, bags
2½ × 4 in8 (2 across, 4 down)Room for a longer message
2 in circle or squareUp to 20 (4 across, 5 down)Jars, small boxes, favors
4 × 5 in, folded to 4 × 2½ in4 (2 across, 2 down)Folded tags with a note inside

For paper, cover-weight cardstock is the sweet spot. As a rough guide from paper suppliers' conversion charts, 65 lb cover is about 176 gsm, 80 lb cover about 216 gsm and 110 lb cover about 298 gsm. Most home inkjet and laser printers handle 65 – 80 lb cover; heavier sheets feel more luxurious but may jam, so check your printer's maximum paper weight in its manual before buying a pack of 110 lb. Note that "80 lb text" is a much lighter paper than "80 lb cover" (about 118 gsm), so compare by gsm when in doubt.

What you'll need

  • Letter-size or A4 cardstock, 65 – 80 lb cover (about 176 – 216 gsm), in white, cream or kraft
  • A home printer, or pens, stamps and ink for hand-made tags
  • A paper trimmer, or a metal ruler, craft knife and cutting mat
  • Scissors or a corner rounder (optional)
  • A hole punch (⅛ or ¼ inch) and optional hole reinforcement stickers or eyelets
  • Twine, ribbon, thin cord or baker's twine
  • Optional: a scalloped or tag-shaped craft punch, washi tape, stickers

How to make printable gift tags

  1. Set up your page

    In Canva (free plan), create a custom design at 2 × 3½ inches for a single tag, then add it to a letter-size page. In Google Slides, use File → Page setup → Custom to set 8½ × 11 inches and draw ten 2 × 3½ inch boxes. Avery Design & Print Online is free and has ready-made tag layouts sized for Avery's pre-cut tag sheets if you prefer those.

  2. Design one tag first

    Keep it simple: a "To / From" line, a short greeting or the recipient's name, and one motif such as a sprig, star or monogram. Leave a clear area of about ¾ inch at the top for the hole. Use dark text on light paper for legibility; fine script fonts smaller than about 12 point get hard to read once printed.

  3. Duplicate and align

    Copy the finished tag into a grid with no gaps, or with small gutters if you'll cut with scissors. Add faint crop marks or a thin light-gray border so you know where to cut.

  4. Do a test print

    Print once on plain paper with scale set to 100% ("actual size"), not "fit to page." Hold the test against a sheet of cardstock or a ruler to check the sizes. This catches layout shifts before you waste good paper.

  5. Print on cardstock

    Choose a paper type such as "Cardstock" or "Heavyweight" in the print dialog, and use the rear or manual feed tray if your printer has one. Print one sheet at a time and let inkjet ink dry for a few minutes before handling.

  6. Cut the tags

    Use a trimmer or a metal ruler and craft knife on a cutting mat for clean edges, always cutting away from your fingers. Clip the top corners at an angle for a classic tag shape, or round all four corners.

  7. Punch and thread

    Punch a hole centered about ½ inch below the top edge. Add a reinforcement sticker or eyelet if the tag will hang from a heavy gift. Thread with 10 – 12 inches of twine or ribbon and tie to the gift.

Tip: Make the text area editable, or leave a blank line, so you can print a full sheet once and handwrite the names. One design then works for every gift of the season.

No-printer versions

  • Stamped kraft tags: cut kraft cardstock to size and stamp a simple shape in white or dark ink; add names with a gel pen.
  • Upcycled tags: cut tags from last year's holiday cards, cereal-box board covered with paper, or pretty catalog pages glued to cardstock. Our guide to eco-friendly gift wrapping has more reuse ideas.
  • Fabric or felt tags: cut felt into shapes and write with a fabric marker; the tag becomes a small ornament.
  • Kid-made tags: let children draw on pre-cut blanks; an adult should handle the craft knife.

Finishing and attaching

Tie the tag where it won't be torn off when the wrapping comes off, such as around the ribbon knot rather than taped to the paper. For bottles, loop the twine around the neck twice. If you've wrapped in solid paper, a patterned tag adds contrast; on busy paper, a plain kraft or white tag stands out. See how to wrap a box neatly and the gift wrapping section for finishing touches, or browse more printables projects.

Frequently asked questions

What is the best paper weight for printable gift tags?

65 – 80 lb cover cardstock (roughly 176 – 216 gsm) is sturdy enough to hang and goes through most home printers. Check your printer manual before using heavier stock.

What size should a gift tag be?

2 × 3½ inches is a practical all-rounder and fits ten to a letter-size sheet. Go smaller for jars and favors, or larger for a folded tag with a message inside.

Can I print gift tags on kraft paper?

Yes, but colors print darker and less vivid on brown kraft because the ink is slightly translucent. Bold, dark designs or white gel-pen lettering work best.

Which free tools can I use to design tags?

Canva's free plan, Google Slides or Docs, and Avery Design & Print Online all work. Any program that lets you set exact sizes in inches and print at 100% scale will do.

Sources

  1. Cardstock Warehouse — Paper 101: Paper Weight Guide. cardstock-warehouse.com
  2. Avery — How to Make Gift Tags: Easy DIY Ideas & Tips. avery.com

Image credits. Top image: Leaves Rustic by Kelly Ishmael, CC0 1.0, via Stocksnap

Written by

Gift specialist and lead author at GiftLoving. Jimmy has worked in the gift business for more than 13 years, makes handmade gifts himself, and writes about what makes a present feel thoughtful to the person who receives it.