Skip to content

Independent gift guides · researched by real people · updated every season

DIY Valentine's Gifts

Handmade valentine cards: layered and pop-up heart designs

Step-by-step layered and pop-up heart valentines in standard A2 size, plus more design ideas, what to write inside and how to send them.

Handmade valentine cards: layered and pop-up heart designs

Quick answer

Cut a letter-size sheet of cardstock in half and fold it to make a standard A2 card (4¼ × 5½ inches). For the easiest handsome design, layer a red heart over a patterned or lace-paper panel; for a little surprise, add a pop-up heart inside with two simple cuts along the fold. Write a short, specific message by hand. Budget about 20 – 30 minutes per card.

  • Time 20 – 30 minutes per card
  • Difficulty Easy (layered) to easy-moderate (pop-up)
  • Cost $10 – $20 for supplies that make 8 – 10 cards
  • Makes 2 A2 cards per letter-size sheet

What you'll need

  • Cardstock, 8½ × 11 inches, 80 – 110 lb cover, in white, cream or kraft for the base
  • Red, pink and patterned cardstock or scrapbook paper for hearts and panels
  • Paper doilies or lace-patterned paper (optional, for a vintage look)
  • A2 envelopes (4⅜ × 5¾ inches)
  • A paper trimmer, or a metal ruler, craft knife and cutting mat
  • Small sharp scissors, a pencil and a heart template (fold scrap paper in half and draw half a heart)
  • A bone folder or butter knife for scoring
  • Glue stick, double-sided tape and a few foam adhesive squares
  • Fine pens, gel pens or a brush pen for lettering

How to make a layered heart valentine

  1. Cut and fold the base

    Cut the cardstock in half to make two pieces of 5½ × 8½ inches. Score each across the middle at 4¼ inches and fold. Scoring first keeps heavy cardstock from cracking along the fold.

  2. Cut a background panel

    Cut a patterned or lace-paper panel of 4 × 5¼ inches, leaving a ⅛-inch border of the base showing. A doily trimmed to size, glued to a solid panel, gives an old-fashioned lace effect.

  3. Make the hearts

    Fold a scrap of paper in half, draw half a heart against the fold, cut it out and unfold: a perfectly symmetrical template. Trace and cut one large heart in red and one slightly smaller in pink or patterned paper.

  4. Layer and mount

    Glue the smaller heart on the larger one, then mount the pair on the background panel with foam squares so it stands slightly raised. Glue the panel to the card front.

  5. Add a sentiment

    Hand-letter "Be mine," "You and me," or the recipient's name on a small strip of white cardstock and tuck it under the heart, or write directly on the panel with a white gel pen.

  6. Finish the inside

    Glue a plain white panel inside if your base is dark, then write your message once all the glue is dry.

How to add a pop-up heart

  1. Make the pop-up step

    Before decorating, fold a second piece of 5½ × 8½ inch cardstock in half to use as an inner card. On the folded edge, near the center, cut two parallel slits about 1 inch long and 1 inch apart, cutting into the card from the fold.

  2. Push it through

    Open the card, push the cut strip through to the inside and close the card firmly to crease it. When you open it, the strip stands out as a small box-shaped step.

  3. Attach the heart

    Glue a heart to the front face of the step only, keeping it below the top edge so it doesn't stick out when closed. Close the card to check it folds flat.

  4. Combine the cards

    Glue the inner pop-up card into your decorated outer card, taking care not to glue over the cut area.

Tip: Make a full test pop-up from copy paper first. It takes two minutes and shows exactly where the heart should sit before you cut good cardstock.

More handmade valentine ideas

  • Heart garland card: punch or cut small hearts and stitch or glue them in a line across the front, like bunting.
  • Window card: cut a heart-shaped window in the front and back it with vellum, a photo or patterned paper.
  • Vintage lace valentine: layer doilies, ribbon and a printed vintage image in the spirit of 19th-century cards.
  • Kids' valentines: fingerprint hearts, stamped potato hearts or folded paper hearts are simple for classroom cards; adults should handle the craft knife. See Valentine's gifts for kids for treats to pair with them.
  • A card with a gift inside: slip in a handmade love coupon or two.
Victorian valentine with white lace paper, gold embossed border and a painted courting couple
Lace-paper valentine made by Esther Howland, ca. 1870s

Inspired by vintage valentines

Handmade valentines have a long history. In the United States, Esther Howland of Worcester, Massachusetts, began making and selling layered valentines with lace paper and short verses pasted inside around 1850, and was later called the "Mother of the American Valentine." Her use of layered lace and paper is still a good template for a card that looks rich without special tools.

What to write and how to send it

What to write inside

A valentine doesn't need poetry. One specific line beats a stock verse: "My favorite part of every day is the ten minutes of coffee before anyone else is awake." For a new relationship, keep it light ("So glad you swiped right"); for a long marriage, a shared memory or a line about what you still notice about them lands best. For friends and Galentine's cards, a funny inside joke is perfect.

Packaging and sending

A finished A2 card fits a standard A2 envelope. Keep raised embellishments thin if you're mailing it; bulky or rigid cards may need extra postage, so ask at the post office. For hand-delivered cards, tie the envelope with thin ribbon or tuck it into a small bouquet. For more projects, browse DIY Valentine's, our general guide to making handmade greeting cards, and Valentine's Day gift guides.

Frequently asked questions

What paper is best for handmade valentine cards?

80 – 110 lb cover cardstock for the card base, and lighter cardstock or scrapbook paper for hearts and layers. Heavier bases stand up well on a shelf.

What size should a homemade valentine be?

A2 (4¼ × 5½ inches folded) is the easiest, because two cut from one letter sheet and ready-made A2 envelopes fit them.

How do I make a pop-up heart card?

Cut two parallel slits into the fold of an inner card, push the strip through to form a step, glue a heart to the front of the step, and glue the inner card into a decorated outer card.

What do I write in a handmade valentine?

One honest, specific sentence about the person, a shared memory or an inside joke. Sign it by hand.

Sources

  1. Wikipedia — Esther Howland. en.wikipedia.org

Image credits. Top image: Paper hearts for valentine by Olugold, CC BY-SA 4.0, via Wikimedia Commons · In-article image: Esther Howland Valentine card, "Affection" ca. 1870s by Esther Howland, Public domain, via Wikimedia Commons

Written by

Gift specialist and lead author at GiftLoving. Jimmy has worked in the gift business for more than 13 years, makes handmade gifts himself, and writes about what makes a present feel thoughtful to the person who receives it.